图片
LOGO
全站搜索
导航菜单
转换语言
 
 
产品详情
KM-8.0 Low-Frequency Instruments

KM-8.0

Especially for Low-Frequency Instruments

GENERAL

-- Tailored frequency response is smooth and extended. Tuned specifically for kick drum applications.
-- Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
-- Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
-- Cartridge includes a neodymium magnet for high output level.
-- Internal shock mount for reduced handling noise.
-- Durable metal construction.
-- Integral stand mount.
-- Hardened steel mesh tapered grille that resists wear and abuse.

 

SPECIFICATIONS

Microphone Type: Dynamic (moving coil)

Polar Pattern: Cardioid (unidirectional)

Frequency Response: 30 to 13,000 Hz polarity positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector

Output Impedance (at 1000 Hz): 300 ohms

Sensitivity (at 1000 Hz): -55dBV/Pa, (1.8mV), 1 Pascal=94dB SPL

Electromagnetic Hum Sensitivity: 25dB equivalent SPL in a 1 millioersted field (60Hz)

Connector: Three-pin professional audio connector (male XLR type)

Case: Die cast metal housing, back matte finish; hardened silver colored, tapered steel mesh grille; built-in locking stand adapter

Environmental Conditions: This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%

Net Weight: 470g

 

Typical Frequency Response Curve

 

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

脚注栏目
图片
脚注信息
Copyright(C)2009-2013 DTECH AUDIO




GPS Tracker For Elderly
访问统计